Categories

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
651.600.3838

Categories

Categories

53157-0113 Indium Wire Solder

$28.05

53157-0113 Indium Wire Solder

$28.05
SKU:
53157-0113
Share

Product Description

INDIUM SN995, No-Clean, CW-807

.015dia., 1.8-2.5% Flux  1/4lb per spool      

MTE Solutions stocks Indium CW-807 wire solder such as the 53157-0113. This page reflects our current inventory and it is updated daily. If it is not available check back at a later date or give us a call at 651-600-3838! 

 

Introduction CW-807 is Indium Corporation’s best selling flux-cored wire primarily because it is compatible with all Indium Corporation no-clean solder pastes, wave fluxes, and all common soft solder alloys. It also solders very well while still meeting the most recent requirements of J-STD-004B type ROL0. CW-807 contains less than 500 ppm total halogen, so it can be considered halogen-free by both J-STD-004B and JEITA ET-7304. CW-807 passes the more stringent Surface Insulation Resistance (SIR) and Electromigration (ECM) requirements of J-STD-004 revision B, therefore the no-clean residue will be electronically safe for virtually all applications. Also when properly configured,* cored wire with CW-807 yields superior results in automated soldering operations, including laser soldering.

 

Features • Halogen-free per J-STD-004B* To be halogen-free per J-STD-004B, the formula must contain less than 500ppm of any kind of halogen, ionic or nonionically bonded chlorine, bromine, or fluorine. This is new to J-STD-004B since fluxes that conform to the original J-STD-004 or J-STD-004A may still contain halogens that only disassociate at soldering temperatures, but leave a residue that contains ionic halogen. • Light-colored, low-smoking, rosin-containing flux Rosin, modified rosins, and resins contribute to enhanced heat stability and reliability. However, in some cases, rosins and resins may interfere with probe-testability. • Tested compatibility with Hot Air Solder Leveled (HASL), Immersion Silver, Electroless Nickel Immersion Gold (ENIG), and Organically Solder Preserved (OSP) Copper surfaces. • Tested for use with all common lead-free and tin-lead alloys, including: SAC305; SAC105; SAC0307; SACm™; 96.5Sn/3.5Ag; 63Sn/37Pb; 60Sn/40Pb; 93.5Pb/5Sn/1.5Ag; Indalloy® 227; Indalloy® 254; silver-free tin-copper plus additive alloys, such as Indium Corporation’s Sn995; and many others.

 

 

cw80711.png

cw8072.png

cw8073.png

cw8074.png

 

Find Similar Products by Category

Condition: New In stock